Third Grade Math IEP Goals Guide
Special Education & Curriculum Blueprint
3rd Grade Scaffolded Math IEP Goals
Standards-Aligned Objectives • Observable Criteria • Progress Monitoring
Domains Covered
3.NBT • 3.NF • 3.MD
Measurable IEP Goal Formula
Condition (given tools/prompts) + Observable Skill + Mastery Criteria (% accuracy across consecutive probes) + Schedule.
3-Tier Scaffolding Progression
Tier 1 (Concrete): Manipulatives, base-10 blocks, visual models
Tier 2 (Representational): Number lines, charts, guided steps
Tier 3 (Abstract): Independent computation & word problems
Number & Operations in Base Ten (3.NBT)
3 Goals
GOAL 3.NBT.A.1 — Place Value & Rounding Biweekly Probes
Annual IEP Goal: Given 10 two- and three-digit whole numbers and a visual number line as needed, the student will round whole numbers to the nearest 10 or 100 with 80% accuracy across 4 out of 5 consecutive biweekly work samples.
Obj 1 (Tier 1): Identify place values (ones, tens, hundreds) using base-10 blocks and locate 2-digit numbers between benchmark tens (80% across 3 trials).
Obj 2 (Tier 2): Use a labeled open number line to round 2- and 3-digit numbers to the nearest 10 (80% across 3/4 probes).
Obj 3 (Tier 3): Independently round 3-digit numbers to the nearest 10 and 100 without visual supports (80% across 4/5 probes).
GOAL 3.NBT.A.2 — Multi-Digit Addition & Subtraction Weekly Probes
Annual IEP Goal: Given 10 multi-digit addition and subtraction problems within 1,000, the student will fluently compute sums and differences using place-value strategies or algorithms with 85% accuracy across 3 consecutive progress-monitoring probes.
Obj 1 (Tier 1): Add and subtract 2-digit numbers with regrouping using place-value mats and base-10 blocks (80% across 3 trials).
Obj 2 (Tier 2): Solve 3-digit addition and subtraction problems without regrouping, then with single-step regrouping using expanded form (85% across 3 probes).
Obj 3 (Tier 3): Fluently add and subtract within 1,000 including regrouping across zeros and check work using inverse operations (85% across 3 probes).
GOAL 3.NBT.A.3 — Multiplying by Multiples of 10 Biweekly Probes
Annual IEP Goal: Given 10 single-digit multiplication problems with multiples of 10 (e.g., \(4 \times 60\)), the student will apply place-value properties to calculate accurate products with 80% accuracy across 4 out of 5 consecutive trials.
Obj 1 (Tier 1): Model groups of ten (e.g., 3 groups of 20) using ten-rods and skip-count to find total products (80% across 3 trials).
Obj 2 (Tier 2/3): Use associative property \((a \times b) \times 10\) to solve \(1\text{-digit} \times \text{multiple of 10}\) problems mentally or in writing (80% across 4/5 trials).
Number & Operations—Fractions (3.NF)
Understanding unit fractions, number-line representation, and equivalence/comparison
3 Goals
GOAL 3.NF.A.1 — Unit Fractions & Part-Whole Models Biweekly Probes
Annual IEP Goal: Given visual area models (fraction bars, circles) partitioned into 2, 3, 4, 6, or 8 equal parts, the student will identify, write, and shade unit fractions (\(\frac{1}{b}\)) and non-unit fractions (\(\frac{a}{b}\)) with 80% accuracy across 4 out of 5 consecutive biweekly work samples.
Obj 1 (Tier 1 — Equal Parts): Distinguish between shapes partitioned into equal vs. unequal parts and name halves, thirds, fourths, sixths, and eighths using fraction tiles (80% across 3 trials).
Obj 2 (Tier 2 — Unit Fractions): Identify and shade one equal part of a partitioned whole to represent a unit fraction \(\frac{1}{b}\) and explain what the numerator and denominator represent (80% across 3/4 probes).
Obj 3 (Tier 3 — Non-Unit Fractions): Write and shade non-unit fractions \(\frac{a}{b}\) as \(a\) parts of size \(\frac{1}{b}\) across varied area models (80% across 4/5 probes).
GOAL 3.NF.A.2 — Fractions on a Number Line Weekly Probes
Annual IEP Goal: Given a number line from 0 to 1 partitioned into equal intervals (halves, thirds, fourths, sixths, eighths), the student will accurately locate, plot, and label given fractions with 80% accuracy across 3 consecutive weekly progress-monitoring checks.
Obj 1 (Tier 1 — Concrete Alignment): Align fraction strips above a 0–1 number line to see each interval as length \(\frac{1}{b}\) rather than counting tick marks (80% across 3 trials).
Obj 2 (Tier 2 — Guided Partitioning): Partition a 0–1 number line into 2, 3, or 4 equal intervals with teacher-provided guide marks and label unit fractions \(\frac{1}{b}\) (80% across 3/4 checks).
Obj 3 (Tier 3 — Independent Plotting): Independently partition 0–1 number lines into 2, 3, 4, 6, or 8 intervals and plot/label non-unit fractions \(\frac{a}{b}\) (80% across 3 consecutive checks).
GOAL 3.NF.A.3 — Equivalent & Comparing Fractions Biweekly Probes
Annual IEP Goal: Given pairs of fractions with the same numerator or same denominator (and simple equivalents like \(\frac{1}{2} = \frac{2}{4}\)), the student will compare fractions using \(>\), \(<\), or \(=\) and justify equivalence with 80% accuracy across 4 out of 5 consecutive assessments.
Obj 1 (Tier 1 — Visual Equivalence): Use fraction bars or number lines to identify simple equivalent fractions (e.g., \(\frac{1}{2} = \frac{2}{4} = \frac{4}{8}\)) and whole-number fractions (\(\frac{4}{4} = 1\)) (80% across 3 trials).
Obj 2 (Tier 2 — Same Denominator/Numerator): Compare two fractions with like denominators or like numerators using visual models and symbols \(>\), \(<\), \(=\) (80% across 3/4 probes).
Obj 3 (Tier 3 — Reasoning & Justification): Compare fractions with same numerator or denominator without models and explain reasoning based on equal-sized wholes (80% across 4/5 assessments).
Measurement & Data (3.MD)
Time intervals, liquid volume & mass, area, perimeter, and scaled data graphs
3 Goals
GOAL 3.MD.A.1 — Telling Time & Elapsed Time Weekly Probes
Annual IEP Goal: Given an analog clock and word problems involving time intervals in minutes, the student will tell and write time to the nearest minute and solve elapsed-time problems within 60 minutes using a number line with 80% accuracy across 4 out of 5 consecutive weekly probes.
Obj 1 (Tier 1 — Nearest 5 & 1 Minute): Tell and write time to the nearest 5 minutes, then to the nearest 1 minute on a geared analog clock (85% across 3 trials).
Obj 2 (Tier 2 — Number-Line Jumps): Use a pre-labeled open number line (10-minute and 5-minute jumps) to find end times when given a start time and elapsed minutes (80% across 3/4 probes).
Obj 3 (Tier 3 — Elapsed-Time Word Problems): Solve one-step word problems to find elapsed time, start time, or end time within an hour (80% across 4/5 probes).
GOAL 3.MD.A.2 — Liquid Volume & Mass Biweekly Probes
Annual IEP Goal: Given visual measurement scales (beakers in liters, scales in grams/kilograms) and one-step word problems, the student will measure, estimate, and solve problems using the four operations with 80% accuracy across 3 consecutive biweekly work samples.
Obj 1 (Tier 1 — Unit Benchmarks): Match real-world objects to appropriate metric units (grams, kilograms, liters) and read labeled scales/beakers (80% across 3 trials).
Obj 2 (Tier 2 — Visual Word Problems): Solve one-step addition and subtraction word problems involving mass or liquid volume with graphic organizers (80% across 3 probes).
Obj 3 (Tier 3 — Four-Operation Problems): Solve one-step word problems involving masses or volumes using all four operations (80% across 3 consecutive work samples).
GOAL 3.MD.B.3 / C.7 / D.8 — Area, Perimeter & Graphs Biweekly Probes
Annual IEP Goal: Given unit-square grids, rectilinear figures with labeled sides, or scaled bar/picture graphs, the student will calculate area and perimeter and solve one- and two-step data comparison problems with 80% accuracy across 4 out of 5 consecutive trials.
Obj 1 (Tier 1 — Unit Counting & Scaled Graphs): Count unit squares to find area, trace side lengths for perimeter, and read scaled bar/picture graphs (scale of 2, 5, or 10) (80% across 3 trials).
Obj 2 (Tier 2 — Multiplication for Area): Relate area to multiplication (\(l \times w\)) on gridded rectangles and solve one-step "how many more/fewer" graph questions (80% across 3/4 probes).
Obj 3 (Tier 3 — Rectilinear & Two-Step Data): Calculate area and perimeter of ungridded rectangles (including missing side lengths) and solve two-step data problems (80% across 4/5 trials).
Reproducible Teacher Tool
IEP Progress Monitoring & Data Log
Student Name:
Case Manager:
IEP Annual Date:
Reporting Period:
| Date |
Goal / Obj # |
Tier |
Score / % |
Met? (Y/N) |
Prompt Level & Instructional Notes |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Prompt & Support Codes
- I — Independent: No cues or tools beyond standard test accommodations.
- V — Visual/Model: Number line, fraction strips, or place-value mat provided.
- G — Guided Cue: Verbal prompt or step-by-step checklist used.
Mastery & Scaffolding Rules
- Advance Tier: Student scores ≥80% across 3 consecutive probes at current tier.
- Reteach / Adjust: If 3 consecutive probes fall below 60%, step back one tier or add concrete manipulatives.