Toy Car Lesson Plan Teacher Lesson Plan • Grades 3–5 Science
Toy Car Force Lab
Balanced & Unbalanced Forces • Cause-and-Effect Investigation
Duration
45 Mins
Learning Objectives
Investigate how balanced forces keep a stationary toy car at rest.
Observe how unbalanced forces cause a toy car to move toward the stronger pull.
Record cause-and-effect data and predict future movement patterns.
Key Vocabulary
Force: A push or a pull acting on an object.
Balanced Forces: Equal forces acting in opposite directions (no change in motion).
Unbalanced Forces: Unequal forces acting on an object (causes motion to start, stop, or change).
Materials Per Lab Group (3–4 Students)
1 free-rolling toy car
2 strings (~60 cm each)
10–12 uniform washers
2 bent paperclip hooks
Masking tape (Start Line)
Washer Pull Lab Sheet
Lab Station Setup
Place a strip of masking tape across the center of a flat desk to mark the Start Line . Tie one string to the front bumper of the toy car and the other to the back bumper. Drape each string over opposite edges of the desk so a bent paperclip hangs freely on each side. Students add washers to test pulling forces while one student holds the car still until "Release!"
45-Minute Pacing Guide
Time
Phase
Teacher & Student Actions
0–7 min
Launch & Hook
Use Force Debrief Slides (Slides 1–2) to introduce the tug-of-war car challenge and model safe washer loading.
7–25 min
Hands-On Lab
Groups run Trials 1–5 on the Washer Pull Lab Sheet , testing equal and unequal washer loads and recording motion.
25–33 min
Analysis & Predict
Students complete Page 2 of the lab sheet: cause-and-effect statements and predicting future movement patterns.
33–45 min
Class Debrief
Use Slides 3–6 to compare group data, test mystery washer predictions, and synthesize rules for balanced vs. unbalanced forces.
Facilitation & Expected Observations
Page 2 • Teacher Key
1. Modeling the Release Protocol
Demonstrate placing the car centered on the masking-tape Start Line. One student gently holds the top of the car while teammates hang washers on the Left and Right paperclips. Count down "3, 2, 1, Release!" and lift the hand straight up without pushing. Remind students to catch the car before it rolls off the desk!
2. Coaching Cause-and-Effect Language
Circulate during Trials 1–5 and prompt students with: "Which side had more washers? What happened to the car's motion because of that?" Help them connect the cause (equal vs. unequal washers) to the effect (stays still vs. moves toward the heavier side).
Expected Trial Results (Answer Key)
Trial
Left Pull
Right Pull
Force Type
Expected Car Motion
1
0 washers
0 washers
Balanced
Stays still on the Start Line (no net pull).
2
2 washers
2 washers
Balanced
Stays still; equal pulls in opposite directions cancel out.
3
1 washer
4 washers
Unbalanced
Rolls to the Right (stronger pull on the right).
4
5 washers
2 washers
Unbalanced
Rolls to the Left (stronger pull on the left).
5
4 washers
4 washers
Balanced
Stays still despite heavier load; forces are still equal.
Note: If a car has high wheel friction, a 1-washer difference may not overcome friction. Suggest a 2+ washer difference if needed.
Pattern Prediction Key
Mystery Test A (6L, 2R): Unbalanced; car will accelerate to the Left .
Mystery Test B (3L, 3R): Balanced; car will stay at rest .
Core Rule: A car only starts moving when forces are unbalanced, moving toward the greater force.
Differentiation & Support
Support: Provide directional arrow cards (← / →) for students to place next to the car before recording.
Challenge: Ask fast finishers to find how many washers are needed to overcome friction against 0 washers.
Class Debrief Anchor Questions
Why didn't the car move in Trial 5 even though we had 8 total washers pulling on it?
How can we predict which way a toy car will move before we even let go of it?
Where do you see balanced and unbalanced forces in everyday life (e.g., tug-of-war, bikes, doors)?
Washer Pull Lab Sheet Name:
Date:
Force & Motion Investigation
Washer Pull Lab Sheet
Lab Setup
Hold car on the Start Line until "3, 2, 1, Release!"
LEFT PULL
Washers
Start Line
RIGHT PULL
Washers
Part 1: Test & Record Force Trials
For each trial, hang the listed washers on the Left and Right hooks. Release the car, observe what happens, and circle the force type.
Trial
Left
Right
Which way did it move?
Speed (Fast / Slow / Still)
Force Type (Circle One)
1
0 washers
0 washers
Balanced
Unbalanced
|
| 2 | 2 washers | 2 washers | | |
Balanced
Unbalanced
|
| 3 | 1 washer | 4 washers | | |
Balanced
Unbalanced
|
| 4 | 5 washers | 2 washers | | |
Balanced
Unbalanced
|
| 5 | 4 washers | 4 washers | | |
Balanced
Unbalanced
|
Quick Check: What happened when BOTH sides had the exact same number of washers?
Part 2: Cause & Effect Analysis
Page 2 • Patterns & Predictions
1. Cause and Effect: Balanced Forces
Look at Trials 2 and 5. Why did the car stay still even though washers were pulling on it?
2. Cause and Effect: Unbalanced Forces
Look at Trials 3 and 4. How did the number of washers cause the car to move in a certain direction?
Part 3: Predict Future Movement Patterns
Use the pattern you discovered to predict what will happen in each Mystery Test without testing it first.
Mystery Test A
Left Hook: 6 washers | Right Hook: 2 washers
Prediction (Which way & why?):
Mystery Test B
Left Hook: 3 washers | Right Hook: 3 washers
Prediction (Which way & why?):
3. Class Debrief Prep: Write Your Force Rule
Complete this idea to share during our class debrief: When forces on an object are balanced, the object... When forces are unbalanced, the object...
Force Debrief Slides Force & Motion Lab
Toy Car Force Lab
Today's Big Question:
If weights are pulling on both sides of a toy car, can the car still stay completely motionless?
Lab Setup & Safety Rules
1. Set the Car
Center the toy car on the masking-tape Start Line with strings draped over opposite desk edges.
2. Load the Washers
One teammate gently holds the car still while others hang washers on the Left and Right hooks.
3. "3, 2, 1, Release!"
Lift your hand straight up without pushing the car. Watch which way it moves!
4. Catch the Car
Always catch the car before it rolls off the desk. Record your data after every trial.
Class Debrief • Part 1
What Happened with Equal Washers?
← 2 Washers (Left) CAR STAYS STILL 2 Washers (Right) →
Discussion: Why didn't the car move in Trial 2 or Trial 5, even with 8 washers pulling on it?
Key Idea: Equal pulls in opposite directions cancel out. These are balanced forces !
Class Debrief • Part 2
Cause & Effect: Unequal Washers
← 1 Washer (Left) CAR ROLLS RIGHT → 4 Washers (Right) →
Cause: One side has a stronger pulling force.
Effect: The car starts moving toward the stronger pull!
Key Idea: Unequal forces cause motion to change. These are unbalanced forces !
Pattern Prediction Challenge
Predict Before We Test!
Mystery Test A
Left: 6 washers | Right: 2 washers
Are the forces balanced or unbalanced? Which way will the car move, and why?
Mystery Test B
Left: 3 washers | Right: 3 washers
Are the forces balanced or unbalanced? What will happen when we release the car?
Wrap-Up & Takeaways
Our Class Force Rules
Balanced Forces = No Change in Motion
If a car is at rest and forces are equal and opposite, it stays at rest.
Unbalanced Forces = Motion Changes
The car accelerates in the direction of the stronger force.
Turn & Talk: Where else have you seen balanced or unbalanced forces today?