Polar Express STEM Slides
Golden Ticket Engineering
Polar Express STEM
All aboard! Use teamwork and creativity to solve three North Pole engineering challenges.
Build a Train
Bridge the Tracks
Deliver the Bell
How Engineers Work
4 Simple Steps
1. Plan
Look at your materials and sketch your idea first.
2. Build
Put your design together piece by piece.
3. Test
Try out your build to see what works well.
4. Improve
Fix weak spots and make it even stronger!
Remember: Mistakes help engineers learn what to try next!
Challenge 1: Build a Train
Design & Roll
Your Mission
Design and build a train car that rolls smoothly down a ramp and holds cargo without tipping over.
Suggested Materials
Cardboard tubes, craft sticks, bottle caps, straws, tape, scissors, small cubes or pennies for cargo.
Visual Steps
- 1 Sketch your train body and wheel placement.
- 2 Build the frame and attach axles using straws.
- 3 Add wheels that spin freely without rubbing.
- 4 Load cargo and test on the ramp!
Challenge 2: Bridge the Tracks
Span & Support
Your Mission
Construct a sturdy bridge across a 20 cm gap that supports a toy train without sagging or collapsing.
Suggested Materials
Craft sticks, index cards, paper cups, tape, clothespins, ruler, and a toy train for testing.
Visual Steps
- 1 Measure the 20 cm gap between two desks or books.
- 2 Plan strong shapes like triangles or folded beams.
- 3 Build a flat track deck wide enough for the train.
- 4 Drive or place the toy train across to test!
Challenge 3: Deliver the Bell
Protect & Cushion
Your Mission
Create a protective package for a jingle bell so it survives a drop test and stays quiet or cushioned inside!
Suggested Materials
Jingle bell, small cup or box, cotton balls, tissue paper, bubble wrap, foil, pipe cleaners, tape.
Visual Steps
- 1 Choose soft padding to absorb the landing shock.
- 2 Build a sturdy outer shell around the padding.
- 3 Seal the bell inside so it cannot fall out.
- 4 Drop from shoulder height and check the bell!
How We Test Fairly
Train Test
Release the train at the top of the ramp without pushing. Measure how far it rolls and check if cargo stays in!
Bridge Test
Place the bridge across the exact 20 cm gap. Roll or rest the toy train in the center for 10 full seconds.
Bell Test
Drop the container straight down from shoulder height. Listen for a quiet landing and inspect the bell!
Keep the test the same for every team so we can compare results!
North Pole Crew Rules
Great Teamwork
- • Listen to every teammate's idea.
- • Share materials and take turns building.
- • Encourage each other during tests.
Safety First
- • Use scissors carefully and keep fingers clear.
- • Only drop bell packages in the test zone.
- • Clean up scrap tape and paper when done.
Ready, engineers? Grab your activity sheet and start planning!
Ticket to Share: Reflect
1
What part of your design worked the best during testing?
2
What problem did you notice, and how did you improve it?
3
If you had 10 more minutes, what would you change next?
Great job today, North Pole Engineers!
North Pole Engineers Activity
Name: ____________________________________
Date: ________________
Polar Express STEM • Challenge 1
Build a Train
Mission: Design and build a train car that rolls down a ramp and holds cargo without tipping over.
Easy Steps
- 1 Sketch your train car and where the wheels will go.
- 2 Build the train body and tape straw axles underneath.
- 3 Attach wheels so they spin smoothly without rubbing.
- 4 Add cargo, place at the top of the ramp, and test!
Materials
- Cardboard tube / box
- 2–3 drinking straws
- 4 bottle caps / wheels
- Craft sticks & tape
- Cargo (cubes/pennies)
My Train Blueprint
Draw your design and label your materials
Test & Improve
Did it roll straight? Yes Almost
Did cargo stay in? Yes Almost
One thing I improved after testing:
Name: ____________________________________
Date: ________________
Polar Express STEM • Challenge 2
Bridge the Tracks
Mission: Build a sturdy bridge across a 20 cm gap that holds a toy train for 10 seconds without sagging.
Easy Steps
- 1 Measure a 20 cm gap between two books or desks.
- 2 Sketch strong shapes (like triangles or folded beams).
- 3 Build a flat track deck wide enough for the toy train.
- 4 Place the train in the middle and count to 10!
Materials
- Craft sticks
- Index cards
- Paper cups
- Masking tape
- Ruler & toy train
My Bridge Blueprint
Draw your bridge supports and track deck
Test & Improve
Spanned 20 cm? Yes Almost
Held train 10 sec? Yes Almost
How I made my bridge stronger:
Name: ____________________________________
Date: ________________
Polar Express STEM • Challenge 3
Deliver the Bell
Mission: Create a protective container for a jingle bell so it survives a shoulder-height drop safely!
Easy Steps
- 1 Plan soft padding layers to cushion the jingle bell.
- 2 Build a sturdy outer shell around the padding.
- 3 Seal the container so the bell stays safely inside.
- 4 Drop from shoulder height and inspect the bell!
Materials
- 1 jingle bell
- Small cup or box
- Cotton balls / tissue
- Bubble wrap / foil
- Tape & pipe cleaners
My Bell Container Blueprint
Draw the inside padding and outside shell
Test & Improve
Bell stayed inside? Yes Almost
Container intact? Yes Almost
What padding worked best and why:
Polar Express STEM Teacher Guide
Educator Resource • Lesson Bundle
Polar Express STEM Teacher Guide
Grade Level
K–5 (Adaptable)
Total Time
55–60 Minutes
Grouping
Pairs or Teams of 3
Lesson Pacing & Flow
| Time |
Phase |
Teacher & Student Actions |
| 10 min |
Hook & Intro Slides |
Share Slides 1–7. Introduce the engineering process and fair-test rules. |
| 10 min |
Plan & Blueprint |
Students inspect materials and sketch their design before building. |
| 25 min |
Build, Test & Improve |
Teams construct prototypes, run fair tests at stations, and iterate. |
| 10–15 min |
Share & Reflect |
Use Slide 8 prompts for a quick gallery walk or whole-class debrief. |
Materials & Station Prep
1. Build a Train
- • Cardboard tubes / boxes
- • Drinking straws & skewers
- • Bottle caps / wheels
- • Masking tape & craft sticks
- • Cargo (cubes / pennies)
- • Test: Cardboard ramp
2. Bridge the Tracks
- • Craft sticks & index cards
- • Small paper cups
- • Masking tape & clothespins
- • Rulers (for 20 cm gap)
- • Test: 2 book stacks 20 cm apart + toy train
3. Deliver the Bell
- • 1 jingle bell per team
- • Small cups or mini boxes
- • Cotton balls & tissue
- • Bubble wrap, foil, tape
- • Test: Marked drop spot on hard floor
Prep Tip: Pre-sort materials into gallon bags or trays per team so students spend more time building and less time waiting in line.
Facilitation & Fair-Test Protocols
Page 2
Challenge 1: Build a Train — Testing & Coaching
Fair Test: Place the train at the top of a 30° ramp and release without pushing. Common Issue: Wheels taped too tightly won't spin. Prompt: "What happens if you put a skewer or rolled paper inside a straw so the axle can spin freely?"
Challenge 2: Bridge the Tracks — Testing & Coaching
Fair Test: Span the exact 20 cm gap and hold the toy train in the center for 10 seconds. Common Issue: Flat index cards bend immediately. Prompt: "How can folding paper into an accordion or triangle change how much weight it holds?"
Challenge 3: Deliver the Bell — Testing & Coaching
Fair Test: Drop from shoulder height onto a hard floor. Check that the bell stayed inside and cushioned. Common Issue: Bell rattles against hard plastic. Prompt: "How can you wrap the bell so it doesn't touch the hard outer wall?"
Supports (K–1 & MLLs)
- • Pre-cut tape strips and stick them to desk edges.
- • Model 1 example of a folded paper beam or straw axle.
- • Allow students to dictate or draw their "Improve" reflection.
Extensions (Grades 3–5)
- • Train: Add a weight goal (hold 15+ pennies).
- • Bridge: Limit tape to 30 cm or widen gap to 25 cm.
- • Bell: Score points for the quietest landing sound!
5-Minute Whole-Class Debrief
- 1. "Which shape or material surprised you by being stronger or softer than you expected?"
- 2. "Tell us about one failure during testing that helped your team make a better design."
- 3. "If our class combined all three builds into one Polar Express track, how would they connect?"