Nspire Intersection Guide aka MENU 64
TI-Nspire CX / CX II Reference
Name: ___________________________ Date: _______________
Finding Function Intersections
Step-by-step guide to locating where two graphs cross on your TI-Nspire.
Sample Problem
\(f_1(x) = 2x + 1\)
\(f_2(x) = -x + 7\)
1
Open a New Graphs Page
Turn on your calculator and press the Home key. Select 1: New (or open Scratchpad), then choose 2: Add Graphs.
on / home 1: New 2: Add Graphs
2
Enter Your First Function
At the f1(x)= entry line at the bottom of the screen, type 2x + 1 and press enter to graph it.
f1(x)= 2x + 1 enter
3
Enter Your Second Function
Press tab to reopen the entry line as f2(x)=. Type -x + 7 (use the white negative key (-), not minus) and press enter.
tab f2(x)= -x + 7 enter
4
Check Your Viewing Window
Make sure you can see where the two lines cross. If the intersection is off-screen, zoom out or adjust the window settings before analyzing.
menu 4: Window/Zoom 4: Zoom - Out or 1: Window Settings
Shortcut Tip: If your entry line disappears, press ctrl + G to toggle the function bar back on at any time.
5
Open the Intersection Tool
Open the menu and navigate to Analyze Graph, then select Intersection.
menu 6: Analyze Graph 4: Intersection
6
Set Lower & Upper Bounds to Lock the Point
A dotted vertical line will appear asking for Lower Bound? Use the touchpad to bracket the crossing point:
Left Move the dotted line to the left of the intersection and press enter (or click).
Right Slide to the right past the intersection so the shaded band covers the crossing, then press enter.
Result: The coordinates \((2, 5)\) appear on screen!
Calculator Screen View
(2, 5) Lower Upper
Troubleshooting & Pro Tips
Two Intersections?
The calculator only finds one crossing at a time. Repeat Steps 5–6 around each crossing point separately.
"No Intersection Found"?
Your Lower and Upper bounds did not surround the crossing, or the lines are parallel and never intersect.
Need More Decimals?
Hover over the coordinate label and press the + key to display extra decimal places.
Try It Yourself!
Use Steps 1–6 to find each intersection point. Round to 2 decimal places if needed.
Practice A
\(f_1(x) = 3x - 4\) | \(f_2(x) = -2x + 6\)
Intersection: ( ____________ , ____________ )
Practice B
\(f_1(x) = x^2 - 3\) | \(f_2(x) = x + 3\) (2 points!)
Intersections: ( ______ , ______ ) & ( ______ , ______ )