Typeface Blueprint Slides
Design Studio // Double Period
Adobe Illustrator
Typeface Design & Vector Craft
Type Foundry Lab
From pencil-and-grid letterform sketches to clean, scalable vector glyphs in Adobe Illustrator.
Grid & Anatomy
Vector Precision
Critique & Refine
Double-Period Roadmap
90–100 Min
01 // Anatomy & Concept 15 min
Decode how typefaces work and choose a clear visual mood for your font.
02 // Sketching on Grid 25 min
Draft your 5 control letters on paper using baseline, x-height, and cap-height guides.
03 // Illustrator Build 35 min
Set up vector guides, trace with minimal anchor points, and unify shapes cleanly.
04 // Critique & Refine 20 min
Run a studio critique to spot optical issues, then polish stroke weights and curves.
Goal: Build a cohesive 5–10 glyph specimen word in Illustrator with clean vector geometry.
Part 1 // Structure
Anatomy of a Letterform
Ascender / Cap Height
X-Height (lowercase body)
Baseline
Descender Line
Hpgy
Stem: Main vertical stroke (e.g., side of H).
Bowl: Curved enclosed space (e.g., p, b, o).
Counter: Negative space inside a letter.
Part 1 // Visual System
What Makes Letters a Family?
Stroke Weight
Keep vertical stems consistent across every letter. Thin and thick parts should follow one clear rule.
Shared Motifs
Repeat terminals, corner radii, serifs, or angles so every glyph feels like it belongs together.
Optical Balance
Round letters (O, C, S) should slightly overshoot the baseline and cap height to look the same size.
Tip: Choose 2–3 adjectives before sketching (e.g., geometric, playful, heavy or sharp, futuristic, condensed).
Part 2 // Sketching Strategy
Start With 5 Control Letters
H Uppercase Vertical stems & crossbar
O Uppercase Curves & outer width
n Lowercase X-height & arch curve
o Lowercase Lowercase bowl & counter
p Descender Bowl + stem join & drop
Once these 5 letters work together, you can reuse their parts to build almost any other letter in your specimen word!
Part 3 // Adobe Illustrator
Setting Up Your Vector Grid
New Document: 1000 × 1000 px Artboards (one per glyph or one wide specimen board).
Rulers & Smart Guides: Press Ctrl/Cmd + R and Ctrl/Cmd + U.
Drag 4 Horizontal Guides: Cap, X-Height, Baseline, Descender—then lock the Guides layer!
Place Sketch: File → Place your photo on a locked Template layer at 30% opacity.
Layer Stack Order
Layer 3: Vector Glyphs (Active)
Layer 2: Typography Guides (Locked)
Layer 1: Pencil Sketch (Template, 30%)
Part 3 // Craft & Precision
Clean Vector Rules in Illustrator
Points at Extrema
Place anchor points only at the top, bottom, left, and right edges of curves. Fewer points = smoother curves!
Build & Unite
Combine rectangles and ellipses with Shape Builder (Shift + M) or Pathfinder → Unite.
Reuse Components
Duplicate stems, bowls, and serifs across letters (Alt/Option + Drag) for instant consistency.
Expand Strokes
Before finishing, convert any stroked paths to filled shapes via Object → Expand so widths never scale weirdly.
Part 4 // Studio Critique
Critique & Refinement Lens
What to Look For
- Consistency: Do all stems look the same weight?
- Alignment: Do letters sit cleanly on the baseline?
- Spacing: Is negative space balanced between glyphs?
- Craft: Are curves smooth with no bumpy anchors?
Glow & Grow Feedback
GLOW: Name one specific strength in the letterform's style or geometry.
GROW: Suggest one concrete vector fix (e.g., "widen the counter of 'o'" or "align 'n' to x-height").
Use the last 10 minutes to apply your top 2 critique fixes!
Font Forge Lesson Plan
Teacher Lesson Plan // Double Period
Type Foundry Lab: Custom Fonts
Duration: 95 Minutes
Graphic Design / Digital Media
Learning Objectives
- Apply typographic anatomy (baseline, x-height, cap height, descender) to original letterforms.
- Translate paper-and-grid control-letter sketches into clean vector glyphs in Adobe Illustrator.
- Evaluate and refine vector craft through structured peer critique.
Materials & Setup
- Adobe Illustrator (desktop/lab computers)
- Printed Letterform Sketching Worksheet
- Pencils, fine-line markers, & phone/camera for sketch capture
- Typeface Blueprint Slides projected
Double-Period Pacing Guide (95 Min)
| Phase & Time |
Teacher Moves |
Student Actions |
| 1. Hook & Anatomy |
|
|
| 15 min |
Present Slides 1–4. Compare two contrasting fonts (e.g., geometric vs. serif) and point out baseline, x-height, stem weight, and optical overshoot. |
Identify font "DNA" traits and choose 2–3 style adjectives for their own custom typeface on the worksheet. |
| 2. Grid Sketching |
|
|
| 25 min |
Model sketching the 5 control letters (H, O, n, o, p) on Slide 5. Circulate to check consistent stem widths and x-height alignment before computers. |
Sketch 5 control letters plus 3–5 extra letters for a specimen word on the worksheet grid. Photograph or scan sketches. |
| 3. Illustrator Build |
|
|
| 35 min |
Run a 6-minute live demo (Slides 6–7): 1000×1000 px artboard, locking 4 horizontal guides, placing template sketch, Pen Tool extrema points, Shape Builder, and Expand. |
Build vector glyphs on the locked grid. Reuse stems/bowls across letters and assemble a specimen word on one artboard. |
| 4. Peer Critique |
|
|
| 10 min |
Pair students or run a silent gallery walk (Slide 8). Prompt reviewers to inspect zoomed-in curves and overall word spacing. |
Complete the "Glow & Grow" peer critique box on their partner's worksheet, citing specific letters and guide alignment. |
| 5. Refinement Sprint |
|
|
| 10 min |
Remind students to remove stray anchor points, verify Object → Expand on strokes, and save both .ai and .png specimen exports. |
Apply top 2 critique fixes, refine kerning/spacing of their specimen word, and write a brief reflection. |
Key Checkpoint: Approve student control-letter sketches before they open Adobe Illustrator. Page 1 of 2
Facilitation, Troubleshooting & Assessment
Type Foundry Lab
Common Adobe Illustrator Pitfalls & Quick Fixes
Bumpy Curves (Too Many Anchors)
Students click 15+ points around a curve. Have them use Object → Path → Simplify or redraw with 4 extrema points (top, bottom, left, right).
Inconsistent Stroke Weights
Students draw each letter from scratch. Remind them to copy/paste one master stem rectangle and one master bowl across glyphs.
Unexpanded Strokes
Resizing a stroked letter changes its thickness. Require Object → Expand + Pathfinder → Unite before final specimen layout.
Round Letters Look Too Small
If "O" and "o" touch the exact flat guides, they look shorter than "H" and "n". Have students nudge curves 2–4 px past the guides (overshoot).
Differentiation & Extension Paths
Scaffolded
Build a modular geometric font using only rectangles, circles, and the Shape Builder Tool (no Pen Tool Bezier handles required).
Extension
Students who finish early can design numbers (0–9), punctuation, or export glyphs into a working .otf/.ttf file using Fontself or Calligraphr.
Studio Assessment Criteria (Specimen Deliverable)
| Criterion |
Target Evidence in Illustrator Specimen |
| Typographic Consistency |
All glyphs align cleanly to baseline, x-height, and cap height with uniform stem weights and shared motifs. |
| Vector Craft |
Smooth curves with minimal anchor points at extrema; shapes are united and strokes expanded. |
| Critique & Revision |
Student documents peer feedback and demonstrates visible refinement in the final specimen word. |
Next Session Idea: Turn specimen words into a typographic poster or export a full A–Z font file. Page 2 of 2
Letterform Sketching Worksheet
Name: ______________________________________
Date: __________________
Type Foundry Lab // Student Studio Sheet
Letterform Sketching & Blueprint
Part 1: Paper to Grid
1. Typeface Concept & DNA
Working Font Name
3 Style Adjectives
Specimen Word (5–8 letters)
2. Control-Letter Sketching Grid
Sketch in pencil. Keep stem widths & corner styles consistent across all 5 boxes.
Cap / Ascender X-Height Baseline Descender
H
O
n
o
p
3. Specimen Word Thumbnail
Sketch your full specimen word to test spacing and rhythm before Illustrator.
Checkpoint: Have your teacher initial your control-letter grid before opening Adobe Illustrator. Teacher Initials: ________
Type Foundry Lab // Vector & Critique
Illustrator Build & Peer Critique
Part 2: Digital Craft
4. Adobe Illustrator Build Checklist
Set up 1000 × 1000 px artboards and turn on Rulers (Ctrl/Cmd+R).
Place anchor points only at curve extrema (top, bottom, left, right).
Create and lock 4 horizontal guides (Cap, X-Height, Baseline, Descender).
Unite overlapping shapes with Shape Builder or Pathfinder → Unite.
Place sketch photo on a locked Template layer at 30% opacity.
Run Object → Expand on any stroked paths before exporting.
5. Peer Critique: Glow & Grow
Reviewer Name: ________________________
Inspect your partner's Illustrator specimen word zoomed in and zoomed out. Check stem consistency, guide alignment, and letter spacing.
GLOW — One specific strength in style or vector craft:
GROW — One concrete fix (e.g., anchor, weight, spacing):
6. Refinement Sprint Log
List the top 2 refinements you made in Adobe Illustrator after peer critique:
Final Export: Save your master .ai file and export your specimen word as .png. Page 2 of 2